ROWE RACING
ONE TEAM. ONE GOAL.
FROM THE RACETRACK TO THE SHELF
ROWE is involved in motorsport not just out of passion for the sport or for a good image, but because no test is more realistic than out on the race track. We therefore use the findings from our “driving laboratory” to research new lubricants and to optimize existing formulations. With ROWE RACING, we achieve what cannot be recreated in any laboratory in the world: the practical test under extreme conditions.
One example: in 2017, we drove a total of 158 laps of the Nürburgring circuit in the BMW M6 GT3 during the 24-hour race. 4,100 kilometers in one day. In everyday traffic, you would have to chase a normal car 82,000 kilometers through the streets in a very short time. Extreme tests like these provide ROWE with valuable data for optimizing its own product range.
Thanks to our own research and development department, we can immediately put new findings into practice and then test our products on the racetrack for their resilience and performance - flexibly, quickly and reliably.
RACING PRODUCTS

Fully synthetic high-performance racing engine oil with unique multi-ester technology
Advantages:
- Maximum shear stability and engine protection
- Reliably prevents deposits in components subject to high thermal stress
- Wide temperature range
- Guarantees stable oil pressure and oil film as well as optimum heat dissipation
- Outstanding wear and component protection
- Miscible and compatible with conventional and synthetic engine oils
Semi-synthetic wheel bearing grease based on lithium complex soap for use in racing
Advantages:
- Wide operating temperature range: -30°C to + 160°C
- Good corrosion protection even under adverse environmental conditions
- Resistant to aging and reduces wear
- Suitable for roller bearings subject to high thermal loads
- High pressure absorption capacity
Fully synthetic high-performance racing gear oil for use in sequentially shifted gearboxes and axle gearboxes with multi-plate clutches subjected to maximum loads
Advantages:
- Reliable wear protection and maximum reliability
- Excellent stability against thermal and mechanical stress
- Maximum oxidation stability and wear protection
- Stable lubricating film even with very hot oil and very high loads
- Compatible with conventional and synthetic transmission oils
High-quality, nitrite-, amine- and phosphate-free ready-to-use coolant system protection for use in racing (frost protection down to -5°C)
Advantages:
- Ready for immediate use
- Excellent heat transfer
- Can be used in cast iron and aluminum engines
- Reliably prevents deposits and protects against cavitation
- Very good and long-lasting corrosion protection
- Minimized foaming tendency
Fully synthetic brake fluid based on glycols with oxidation and corrosion inhibitors for multifunctional use
Advantages:
- Very high reserves in dry and wet boiling behavior
- Reliably prevents dangerous vapor bubble formation
- Protects brake and clutch hydraulics from deposits and corrosion
- Multifunctional use in passenger cars, commercial vehicles, buses, agricultural machinery, and construction equipment
- Backward compatible with conventional DOT 3 and DOT 4 brake fluids
- Miscible and compatible with other synthetic brake fluids
Fully synthetic drive shaft grease based on calcium complex soap for racing use
Advantages:
- Good low-temperature behavior and wide application range: -40°C to +150°C
- Mechanically highly resilient lubricating grease
- Wear-reducing with high load-carrying capacity
About the product








MILESTONES
NÜRBURGRING
ENDURANCE RACE
WINNER
2020 & 2025
24H NÜRBURGRING
SECOND
2017 & 2021 & 2023
24H NÜRBURGRING
THIRD PLACE
2013 & 2014
24H NÜRBURGRING
GT WORLD CHALLENGE europe
Winner
2016 & 2020 & 2023
24H SPA
Second
2018 & 2019
24H SPA
Endurance Cup-Victory
08/2025
Nürburgring
PHILOSOphy
Passion for motorsport creates real added value for customers
ROWE RACING was founded in 2011 for racing on the Nürburgring-Nordschleife and has developed into one of the best and most successful endurance teams in the world in less than ten years. The preliminary highlight was the double victory in the two 24-hour classics at the Nürburgring and in Spa in 2020 - within just four weeks and as the only team in the GT3 era with two different manufacturers. The team's main focus has always been on endurance racing, but especially on the extreme challenge of the 24-hour races. “The more difficult the situation and the greater the stress, the more ROWE RACING can shine,” says Team Principal Hans-Peter Naundorf.
With the “driving laboratory”, ROWE researches new lubricants, optimizes formulations and achieves what cannot be recreated in any laboratory in the world: the practical test under extreme conditions. By transferring technology from the race track to the shelf, ROWE succeeds in making products even better. Highest quality standards, customer satisfaction and enthusiasm for motorsport in absolute harmony.

HOMEBASE
Motorsport Competence Group AG, which was founded in 2011 by ROWE founder Michael Zehe and former DTM engineer Hans-Peter Naundorf, is responsible for ROWE RACING's racing activities. MCG AG employs 35 full-time and part-time staff at the team headquarters and at the racetrack. For particularly labor-intensive events such as a 24-hour race, the team strength is increased to more than 40 members.
PROJECTS
MCG AG has made a name for itself with various projects in motorsport, with ROWE RACING being the main field of activity. However, the company also helps with the reliable implementation of various contract projects for other customers.
LOCATION
The home of MCG AG is a building complex in St. Ingbert in Saarland, which offers 31600 m² of usable space following recent renovations and extensions. The new company headquarters, built when the team was founded, was specially designed to meet the needs of modern motorsport and is conveniently located less than 150 kilometers from the two traditional 24-hour race tracks Nürburgring and Spa. The centerpiece is a modern vehicle hall in which up to six racing vehicles can be worked on at the same time. A team of mechanics with motorsport experience builds racing cars here using state-of-the-art equipment and prepares them for racing. There are also in-house gearbox and carbon fiber workshops as well as a department for the design and production of vehicle decals.
BMW M FACTORY DRIVER 2025
THE NEXT RACES

Follow us on
INSTAGRAM, FACEBOOK & TIKTOK
AT OUR SIDE







